User Tools

Site Tools


rpi_temp_v5_0

Raspberry Pi Temperature Sensor

FeatureSupport
Sending
Receiving
Config

Supported Brands

BrandProtocol
Raspberry Pirpi_temp

Sender Arguments

None

Config

        "RpiTemp": {
                "name": "Raspberry Pi Temp.",
                "temperature": {
                        "name": "Temperature",
                        "protocol": [ "rpi_temp" ],
			"id": [{
				"id": 1
			}],
                        "temperature": 41160
                }
        }

Optional Settings

SettingDefaultFormatDescription
device-decimals3numberHow many decimals does the temperature information contain
gui-decimals3numberHow many decimals are shown in the web GUI
gui-show-temperature11 or 0Don't display the temperature value
poll-interval5secondsWhat should be the poll interval of the sensors
device-temperature-offset0numberCorrect temperature value

Protocol

None

Note

It is possible you need to first load the sensor module:

sudo modprobe bcm2835_thermal

To make sure this is done every reboot, edit /etc/modules and add the following lines:

bcm2835_thermal
rpi_temp_v5_0.txt · Last modified: 2015/11/27 22:09 (external edit)