Ping
None
None
"devices": { "ping": { "protocol": [ "ping" ], "id": [{ "ip": "x.x.x.x" }], "state": "connected" } },
Device Settings
Setting | Default | Format | Description |
---|---|---|---|
poll-interval | 1 | >= 1 | How often do we want to ping the ip (in seconds) |
The ping protocol uses the ICMP ECHO request command and reports the state DISCONNECTED if it receives a response that it is not an ECHO REPLY.
The ping protocol doesn't have a GUI representation. You can of course use the ping protocol in your rules.
3 - Destination Unreachable 4 - Source Quench 5 - Redirect (change route) 11 - Time Exceeded 12 - Parameter Problem 13 - Timestamp Request 14 - Timestamp Reply 15 - Information Request 16 - Information Reply 17 - Address Mask Request 18 - Address Mask Reply