User Tools

Site Tools


low-pass_filters.txt

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
low-pass_filters.txt [2015/04/16 10:44]
wo_rasp
low-pass_filters.txt [2015/11/27 22:09] (current)
Line 19: Line 19:
 Install pilight-firmware if you didn't yet: Install pilight-firmware if you didn't yet:
  
-sudo apt-get install pilight-firmware+''​sudo apt-get install pilight-firmware''​
  
 Flash the ATTiny45, that's the part where you tell the ATTiny45 microcontroller,​ which work it should do. In this case filter some radio noise. Do the flashing with the following command: Flash the ATTiny45, that's the part where you tell the ATTiny45 microcontroller,​ which work it should do. In this case filter some radio noise. Do the flashing with the following command:
  
-sudo pilight-flash -f /​etc/​pilight/​pilight_firmware_t45_v3.hex+''​sudo pilight-flash -f /​etc/​pilight/​pilight_firmware_t45_v3.hex''​
  
 Restart the pilight service: Restart the pilight service:
  
-sudo service pilight restart+''​sudo service pilight restart''​
  
 Your ATTiny45 is flashed and should work. Test if receiving radio signals still works, by firing up “pilight-receive”. Be sure that the pilight service is up and running, else pilight-receive won't work.  Your ATTiny45 is flashed and should work. Test if receiving radio signals still works, by firing up “pilight-receive”. Be sure that the pilight service is up and running, else pilight-receive won't work. 
low-pass_filters.txt.txt · Last modified: 2015/11/27 22:09 (external edit)