User Tools

Site Tools


lirc_v6_0

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
lirc_v6_0 [2015/01/22 22:51]
curlymo created
lirc_v6_0 [2015/11/27 22:09] (current)
Line 60: Line 60:
  
 pilight tries to connect to the lirc socket found in ''/​dev/​lircd''​ so make sure it exists or a symlink to the original socket is created to ''/​dev/​lircd''​. pilight tries to connect to the lirc socket found in ''/​dev/​lircd''​ so make sure it exists or a symlink to the original socket is created to ''/​dev/​lircd''​.
 +
 +** Raspbian Kernels 3.18 and higher **
 +
 +The most recent Raspbian release, with Pi 2 support, switches to a new kernel (3.18), and includes a configuration change to enable Device Tree support by default.
 +
 +You do need to add ''​dtoverlay=lirc-rpi''​ to /​boot/​config.txt.
 +
 +Depending on your hardware setup, lirc-rpi module parameters are added to the end of the dtoverlay line:
 +gpio_in_pin=16,​gpio_in_pull=high,​gpio_out_pin=17
 +
 +Example:
 +<​code>​
 +dtoverlay=lirc-rpi,​gpio_in_pin=18,​gpio_out_pin=17
 +</​code>​
lirc_v6_0.txt ยท Last modified: 2015/11/27 22:09 (external edit)