User Tools

Site Tools


lirc_v5_0

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lirc_v5_0 [2015/02/14 17:26]
wo_rasp
lirc_v5_0 [2015/11/27 22:09] (current)
Line 53: Line 53:
 The most recent Raspbian release, with Pi 2 support, switches to a new kernel (3.18), and includes a configuration change to enable Device Tree support by default. The most recent Raspbian release, with Pi 2 support, switches to a new kernel (3.18), and includes a configuration change to enable Device Tree support by default.
  
-You do need to add ''​dtoverlay=lirc-rpi''​ to ''​/​boot/​config.txt''​ +You do need to add ''​dtoverlay=lirc-rpi''​ to /​boot/​config.txt
-lirc-rpi module parameters are added to the end of the dtoverlay line: + 
-''​dtoverlay=lirc-rpi,​gpio_in_pin=16,​gpio_in_pull=high",​gpio_out_pin=17''​+Depending on your hardware setup, ​lirc-rpi module parameters are added to the end of the dtoverlay line: 
 +gpio_in_pin=16,​gpio_in_pull=high,​gpio_out_pin=17
  
 Example: Example:
lirc_v5_0.txt · Last modified: 2015/11/27 22:09 (external edit)