Sidebar
gpio_switch
This is an old revision of the document!
Table of Contents
GPIO Switch
| Feature | Support |
|---|---|
| Sending |  |
| Receiving |  |
| Config | |
Supported Brands
None
Sender Arguments
-g --gpio=gpio the gpio the relay is connected to
Config
"living": {
"name": "Living",
"switch": {
"name": "switch",
"protocol": [ "gpio_switch" ],
"id": [{
"gpio": 1
}],
"state": "off"
},
}
Optional Settings
| Setting | Default | Format | Description |
|---|---|---|---|
| gui-readonly | 0 | 1 or 0 | Disable controlling this device from the GUIs |
Notes
The GPIO switch protocol follows the wiringPi numbering as can be found here: https://projects.drogon.net/raspberry-pi/wiringpi/pins/
Or the Radxa numbering as found here: http://radxa.com/Rock/extension_header
gpio_switch.1421488217.txt.gz · Last modified: 2015/11/27 22:08 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
