User Tools

Site Tools


gpio_switch

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
gpio_switch [2014/11/04 19:29]
curlymo created
gpio_switch [2015/01/17 09:54]
Luppie [Notes]
Line 12: Line 12:
 ==== Sender Arguments ==== ==== Sender Arguments ====
 <​code>​ <​code>​
--t --on           turn the relay on 
--f --off          turn the relay off 
 -g --gpio=gpio ​   the gpio the relay is connected to -g --gpio=gpio ​   the gpio the relay is connected to
  
Line 40: Line 38:
 ==== Notes ==== ==== Notes ====
  
-The relay protocol follows the wiringPi numbering as can be found here: https://projects.drogon.net/​raspberry-pi/​wiringpi/pins/+The GPIO switch ​protocol follows the wiringPi numbering as can be found here: http://wiringpi.com/pins/
  
 Or the Radxa numbering as found here: Or the Radxa numbering as found here:
 http://​radxa.com/​Rock/​extension_header http://​radxa.com/​Rock/​extension_header
gpio_switch.txt ยท Last modified: 2015/11/27 21:09 (external edit)