User Tools

Site Tools


ds18s20

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
ds18s20 [2014/01/17 22:26]
curlymo created
ds18s20 [2014/06/11 08:33]
curlymo
Line 6: Line 6:
 |Config|{{http://​wiki.pilight.org/​lib/​images/​supported.gif}}| |Config|{{http://​wiki.pilight.org/​lib/​images/​supported.gif}}|
  
-Supported Brands+==== Supported Brands ​====
 ^Brand^Protocol^ ^Brand^Protocol^
 |1-Wire|ds18s20| |1-Wire|ds18s20|
  
-Supported Brands +==== Sender Arguments ​====
- +
-Sender Arguments+
  
 //None// //None//
  
-Config+==== Config ​====
 <​code>​ <​code>​
         "​living":​ {         "​living":​ {
Line 31: Line 29:
 </​code>​ </​code>​
  
-Optional Settings+==== Optional Settings ​====
  
 ^Setting^Default^Format^Description^ ^Setting^Default^Format^Description^
-|decimals|3|number|How many decimals does the temperature information contain| +|device-decimals|3|number|How many decimals does the temperature information contain| 
-|humidity|0|1 or 0|Don'​t display the humidity value| +|gui-show-temperature|1|1 or 0|Don'​t display the temperature value| 
-|temperature|1|1 or 0|Don'​t display the temperature value| +|poll-interval|5|seconds|What should be the poll interval of the sensors| 
-|battery|0|1 or 0|Don'​t display the battery value| +|device-temperature-offset|0|number|Correct temperature value|
-|interval|5|seconds|What should be the poll interval of the sensors| +
-|humi-corr|0|number|Correct humidity value| +
-|temp-corr|0|number|Correct temperature value|+
  
 Protocol Protocol
Line 46: Line 41:
 //None// //None//
  
-Note+==== Notes ====
  
 Before pilight can see the sensor, you have to run the following commands: Before pilight can see the sensor, you have to run the following commands:
ds18s20.txt · Last modified: 2015/11/27 21:09 (external edit)