This is an old revision of the document!
A list of supported and tested devices. Feel free to add your device if tested and working properly. Do notice that this list is still far from complete
Don't forget to tell us what protocol you used!
Brand | Model | Type | Protocol |
---|---|---|---|
Brennenstuhl | RCS 1000SN | Remote | elro_800_remote |
DI-O | PBT-707 | Remote | |
DI-O | CACYT-814 | Remote | |
Elro | HE844A | Remote | |
KaKu | PAT-103 | Remote | |
KaKu | YCT-100 | Remote | |
KaKu | TMT-502 | Remote | |
KaKu | APA2-2300R | Remote + Switch | |
KaKu | APA3-1500R | Remote + Switch(es) | |
Brennenstuhl | RCS 1000N | Switch | elro_800_switch |
DI-O | PDR-2300 | Switch | |
DI-O | PER-1500 | Switch | |
DI-O | CAYCR-3500 | Switch | |
DI-O | LCMR-1000 | Switch | |
Conrad | RSL | Switch(es) | |
Conrad | HE8xx | Switch(es) | |
Globaltronics | GT-FSI-04a | Switch | |
Kangtai | Switch | elro_he | |
KaKu | ASUN-650 | Switch | |
KaKu | PAR-1000 | Switch | |
KaKu | CM-1000 | Switch | |
KaKu | ACM-1000 | Switch | |
KaKu | ACM-3500-3 | Switch (3-in-1) | Use random ID & Unit and add to config.json (E.g. 14140001 + 0). Put device into learning mode and toggle on/off from webgui until device clicks for acceptance. |
KaKu | AWMT-230 | Switch | |
Intertechno | PA3-1000 | Switch | |
Intertechno | CMR-500 | Switch | |
Intertechno | ITR/ITT-1500 | Switch+Remote | intertechno_old |
Intertechno | PAR-1500 | Switch | intertechno_old |
Intertechno | ITDM-250 | Dimmer | kaku_dimmer |
Intertechno | ITL-230 | Switch | intertechno_old |
Intertechno | ITL-250 | Dimmer | kaku_dimmer |
Intertechno | ITLR-300 | Switch/Dimmer | intertechno_old/kaku_dimmer |
Elro | AB-660 | Switch | |
Elro | AB-440S | Switch | |
Elro | AB-440WD | Switch | elro_400_switch |
Elro | HE-842 | Wall Switch | use workaround from here: http://forum.pilight.org/Thread-Elro-Home-Easy-HE815S--1039?pid=6036#pid6036 |
Elro | HE874 | Switch | use workaround from here: http://forum.pilight.org/Thread-Elro-Home-Easy-HE815S--1039?pid=6036#pid6036 |
Nexa | PE-3 | Switch | |
Pollin | 2605 | Switch | |
Powerfix | RCB-A 3600R | Switch | quigg_gt7000 http://forum.pilight.org/Thread-control-sockets-with-pilight-broken-remote?pid=9469#pid9469 |
Mumbi | m-FS300 | Switch | Only the old one with DIP. The new one doesn't have a DIP switch. |
KaKu | ACD-300 | Dimmer | |
KaKu | ACM-100 | Dimmer | |
KaKu | ACM-300 | Dimmer | |
Kaku | ACD-200 | Dimmer | |
KaKu | AWMR-210 | Dimmer | |
Conrad | RSL | Contact sensor | |
Elro | HE-852 | Contact sensor | use workaround from here: http://forum.pilight.org/Thread-Elro-Home-Easy-HE815S--1039?pid=6036#pid6036 |
KaKu | AMST-606 | Contact sensor | |
Alecto | WSD-17 | Weather station | |
LogiLink | WS-0001 | Weather station | |
Various | LM75 | Temperature Sensor | |
Various | LM76 | Temperature Sensor | |
DI-O | EJLR-1000 | Screen | |
Shenzhen Kelvin | KL-690 | PIR Sensor | protocol_plslen_add(sc2262, 439); |
Brennenstuhl | RCS 1000 N Comfort | Remote | brennenstuhl (up to 32 system codes + 32 devices per system code = max. 1,024 devices) |