User Tools

Site Tools


bcm2835

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

bcm2835 [2014/06/11 08:32]
curlymo
bcm2835 [2015/11/27 21:09]
Line 1: Line 1:
-**Raspberry Pi Temperature Sensor** 
  
-^Feature^Support^ 
-|Sending|{{http://​wiki.pilight.org/​lib/​images/​notsupported.gif}}| 
-|Receiving|{{http://​wiki.pilight.org/​lib/​images/​supported.gif}}| 
-|Config|{{http://​wiki.pilight.org/​lib/​images/​supported.gif}}| 
- 
-==== Supported Brands ==== 
-^Brand^Protocol^ 
-|Raspberry Pi|rpi_temp| 
- 
-==== Sender Arguments ==== 
- 
-//None// 
- 
-==== Config ==== 
-<​code>​ 
-        "​RpiTemp":​ { 
-                "​name":​ "​Raspberry Pi Temp.",​ 
-                "​temperature":​ { 
-                        "​name":​ "​Temperature",​ 
-                        "​protocol":​ [ "​rpi_temp"​ ], 
- "​id":​ [{ 
- "​id":​ 1 
- }], 
-                        "​temperature":​ 41160 
-                } 
-        } 
-</​code>​ 
- 
-==== Optional Settings ==== 
- 
-^Setting^Default^Format^Description^ 
-|device-decimals|3|number|How many decimals does the temperature information contain| 
-|gui-show-temperature|1|1 or 0|Don'​t display the temperature value| 
-|poll-interval|5|seconds|What should be the poll interval of the sensors| 
-|device-temperature-offset|0|number|Correct temperature value| 
- 
-==== Protocol ==== 
- 
-//None// 
- 
-Note 
- 
-It is possible you need to first load the sensor module: 
-<​code>​ 
-sudo modprobe bcm2835_thermal 
-</​code>​ 
- 
-To make sure this is done every reboot, edit ''/​etc/​modules''​ and add the following lines: 
-<​code>​ 
-bcm2835_thermal 
-</​code>​ 
bcm2835.txt ยท Last modified: 2015/11/27 21:09 (external edit)