User Tools

Site Tools


auriol

This is an old revision of the document!


Auriol Weather Station

FeatureSupport
Sending
Receiving
Config

Supported Brands

BrandProtocol
Auriolauriol

This weather station was available at the Lidl. Description for device could be: “Auriol IAN 89210 FUNK-WEATHER STATION/RADIO CONTROLLED WEATHER”, Hama EWS-750 (not confirmed) and IAN 55982 (neither confirmed). The sensor can be identified by the option to choose from 3 different channels.

Sender Arguments

None

Config

        "garden": {
                "name": "Garden",
                "weather": {
                        "name": "Weather",
                        "protocol": [ "auriol" ],
			"id": [{
				"id": 3
			}],
                        "temperature": 189,
                        "humidity": 410,
                        "battery": 1
                }
        }

Humidity and battery assumed to be supported by this protocol, but might not be. The battery function is not tested 100% and humidity seems to vary regularly. Please be aware that the ID of a sensor is actually the channel.

Optional Settings

SettingDefaultFormatDescription
device-decimals2numberHow many decimals does the weather information contain
device-humidity-offset0numberCorrect humidity value
device-temperature-offset0numberCorrect temperature value
gui-decimals2numberHow many decimals should the GUIs display
gui-show-humidity11 or 0Don't display the humidity value
gui-show-temperature11 or 0Don't display the temperature value
gui-show-battery11 or 0Don't display the battery value

Protocol

This protocol has similarities with the protocols alecto and threechan.

Each (group of 2) numbers have the following specific meaning:

  • Battery ID 0 untill 7 (assumed)
  • Battery: 8
  • TX mode: 9
  • Channel: 10 untill 11 (3 = 10, 2 = 01, 1 = 11)
  • Temperature: 12 untill 23
  • Humidity: 24 untill 31 (assumed, alternatively this might be a checksum)
  • Footer: 32
  • The Battery ID is not used
  • The Battery identifies the state of the battery
  • The TX mode defines whether the signal was sent automatically or manually
  • The ID is defined as a binary number and specifies which channel the sensor uses
  • The Temperature is defined as a binary number and represents the temperature
  • The Humidity is defined as a binary number and represents the humidity (unconfirmed)

Checksum

According to the reveng tool it's a CRC-4-ITU checksum (start=0x0, width=4 check=0x7, poly=3), we need someone to write the c code to check according to this CRC as humidity seems not to be supported by protocol.

This protocol was created for pilight with the help of pilight-debug.

auriol.1414054353.txt.gz · Last modified: 2015/11/27 21:08 (external edit)